View ADA10000_346041.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ADA10000
Linear Amplifier MMIC
FEATURES
* * * * High Linearity : +15 dBm IIP3 Low Noise Figure: 2.0 dB Single Supply: +8 VDC Wide Bandwidth: 50 MHz to 1 GHz
Data Sheet - Rev 2.2
S3 Package Modified 16 Pin SOIC PRODUCT DESCRIPTION
The ADA10000 is a monolithic IC intended for use in applications requiring high linearity, such as Cellular Telephone Base Station Driver Amplifiers, CATV Fiber Receiver and Distribution Amplifiers and CATV Drop
Amplifiers. Offered in a modified 16 lead surface mount SOIC package, it is well suited for use in amplifiers where small size, reduced component count, and high reliability are important.
RF Input
15 dB
RF Output / Bias
Figure 1: Block Diagram
08/2001
ADA10000
1 2 3 4 5 6 7 8
GND GND GND GND GND RFIN GND GND
Figure 2: Pin Out
GND GND RFOUT GND GND GND GND GND
16 15 14 13 12 11 10 9
Table 1: Pin Description
PIN 1 2 3 4 5 6 7 8 N AME GND GND GND GND GND RFIN GND GND D ESC R IPTION Ground Ground Ground Ground Ground RF Input Ground Ground PIN 9 10 11 12 13 14 15 16 N AME GND GND GND GND GND RFOUT GND GND D ESC R IPTION Ground Ground Ground Ground Ground RF Output / Supply Ground Ground
2
Data Sheet - Rev 2.2 08/2001
ADA10000
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Maximum and Minimum Ratings
PAR AMETER Supply (pi n 14) RF Power at Input (pi n 6) Storage Temperature Solderi ng Temperature Solderi ng Ti me MIN 0 -65 MAX +12 +10 +150 260 5 U N IT VD C dB m
o
C C
o
se c
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Note: 1. Pin 6 should be AC-coupled. No external DC bias should be applied.
Table 3: Operating Ranges
PAR AMETER RF Input / Output Frequency Supply Voltage: VDD (pi n 14) C ase Temperature MIN 50 +4 -40 TYP +8 MAX 1000 +9 +85
(1)
U N IT MHz VD C
o
C
The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Note: (1) Median time to failure will degrade above this temperature.
Data Sheet - Rev 2.2 08/2001
3
ADA10000 Table 4: Electrical Specifications (TA = +25 C, VDD = + 8 VDC, Test System = 75W )
PAR AMETER C SO (1) / C SO (2) C TB Gai n Noi se Fi gure 2nd Order Input Intercept Poi nt (IIP2) (3) 3rd Order Input Intercept Poi nt (IIP3) (3) Thermal Resi stance C urrent C onsumpti on (4)
(1)
MIN 60 / 62 65 / 74 14 +29 +13 50
TYP 15 2.0 +34 +15 -
MAX 3.5 35 150
U N IT dB c dB c dB dB dB m dB m
o
/C TB
(2)
C /W mA
Notes: (1) 160 channels, +17 dBmV per channel (measured at output), 6 MHz channel spacing (2) 80 channels, +19 dBmV per channel (measured at output), 6 MHz channel spacing. (3) Two tones, -10 dBm per tone at input (4) The device can be operated at VDD = +6 VDC for lower power dissipation. Refer to the figures on page 5 for performance variation with supply voltage.
1000 pF
RF OUT
ADA10000
3.9 H
1000 pF
5.6 nH
0.1 f
RFIN
Figure 3: Test Circuit
4
Data Sheet - Rev 2.2 08/2001
ADA10000
PERFORMANCE DATA
18 17 Gain (dB) 16 15 14 13 12 50 250 450 650 Frequency (MHz) 850
Figure 4: Gain Noise Figure vs. Frequency TA = 25 oC, VDD = +8V
4 3.5 3 2.5 2 1.5 1 Noise Figure (dB)
GAIN
NF
Figure 5: Gain and Noise Figure vs. VDD TA = 25 o C, RF = 500 MH z
15.8
2.02
GAIN
15.75 Gain (dB) 15.7 15.65 15.6 15.55 4 5
NF
1.98 1.96 1.94 1.92 1.9 1.88 6 7 VDD (Volts)
Figure 6: IIP2, IIP3 vs. VDD
8
9
TA = 25 oC
40 37 34
30 27 24 21 18 15 12 9 6
IIP2
IIP3
IIP2 (dBm)
31 28 25 22 19 16 4 5 6 7 8 9
V D D (V o l t s)
Notes: 1. IIP2 measured at 986.5 MHz; Input = two tones at 55.25 MHz and 931.25 MHz at -10 dBm. 2. IIP3 measured with two tones at the input: 986.5 MHz and 992.5 MHz at -10 dBm. Data Sheet - Rev 2.2 08/2001
IP3 (dBm)
Noise Figure (dB)
2
5
ADA10000 Figure 7: Output Power vs. Input Power
26 25 24 Output Power (dBm) 23 22 21 20 19 18 17 16 15 0 2 4 6 8 Input Power (dBm) 10 12
TA = 25 oC, VDD = +8V, RF = 500 MHz
Figure 8: Input Impedance
START: 0.050 GHz STOP: 1.00 GHz
1: 0.050 GHz 79.76 - 4.79 j
1 .5 2 5 5 0 -.2 .2 .5
32 54 6
2:
0.20 GHz 77.88 - 13.21 j
.2
1
3:
1
2
5
4:
0.40 GHz 70.02 - 21.83 j 0.6 GHz 59.63 - 26.56 j 0.8 GHz 49.91 - 26.56 j 1.0 GHz 41.77 - 25.15 j
-5
5:
-.5 -1
-2
6:
Measured in 75 System
Figure 9: Output Impedance
START: 0.050 GHz STOP: 1.00 GHz
1 .5 2
3:
1: 0.050 GHz 83.9 - 8.1 j 0.20 GHz 84.17 - 1.19 j
2:
.2 5
1
5
4:
0.40 GHz 85.38 - 2.27 j 0.6 GHz 87.64 - 3.82 j 0.8 GHz 90.20 - 6.60 j 1.0 GHz 93.57 - 11.76 j
0 -.2
.2
.5
1
6
2
5 -5
5:
-.5 -1
-2
6:
Measured in 75 System
6
Data Sheet - Rev 2.2 08/2001
ADA10000
PACKAGE OUTLINE
D C
LE
E
H
0.015 [0.38]X45
L
a
A A2 A1
GAUGE PLANE 0.003 [0.076mm] SEATING PLANE
e
B1
B
S
Y M
INCHES
B O L
MILLIMETERS
MIN. MAX.
NOTE
NOTES: 1. CONTROLLING DIMENSION: INCHES 2. DIMENSION "D" DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH, PROTRUSIONS AND GATE BURRS SHALL NOT EXCEED 0.006 [0.15mm] PER SIDE. 3. DIMENSION "E" DOES NOT INCLUDE INTER-LEAD FLASH OR PROTRUSIONS. INTER-LEAD FLASH AND PROTRUSIONS SHALL NOT EXCEED 0.010 [0.25mm] PER SIDE.
MIN.
MAX.
A A1 A2
B
0.058 0.004 0.055 0.013 0.062 0.008 0.380 0.150
0.068 0.010 0.065 0.020 0.070 0.010 0.400 0.160
1.47 0.10 1.40 0.33 1.58 0.20 9.66 3.81
1.73 0.25 1.65 0.50 1.78 0.25 10.16 4.06 4 2 3
B1 C D E e H L LE
4. LEAD THICKNESS AFTER PLATING TO BE 0.013 [0.33mm] MAXIMUM.
0.050 BSC 0.226 0.016 0.030 0 8 0.244 0.040
1.27 BSC 5.74 0.41 0.76 0 8 6.20 1.02
SPECIFICATION: SUBJECT:
98000-006
PUBLISHED OUTLINE,
16 LEAD BATWING SOIC PKG.
a
Figure 10: S3 Package Outline - Modified 16 Pin SOIC
Data Sheet - Rev 2.2 08/2001
7
ADA10000
ORDERING INFORMATION
OR D ER N U MB ER AD A10000S3C TR A D A 10000S 3C TEMPER ATU R E R AN GE -40 oC to +85 oC -40 oC to +85 oC PAC K AGE D ESC R IPTION Modi fi ed 16 Pi n SOIC Modi fi ed 16 Pi n SOIC C OMPON EN T PAC K AGIN G 3,500 pi ece Tape and Reel Plasti c tubes (50 pi eces per tube)
ANADIGICS, Inc. 35 Technology Drive Warren, New Jersey 07059 Tel: (908) 668-5000 Fax: (908) 668-5132 http://www.anadigics.com Mktg@anadigics.com
IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a products formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. Data Sheet - Rev 2.2 08/2001
8

▲Up To Search▲

Price & Availability of ADA10000

	To Download ADA10000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .